The Dirt King DK-922906 lift spindles elevate the front end by a genuine 3.5 inches while maintaining optimal ride comfort. These spindles stand out as the sole option for F-150s, accommodating both factory and aftermarket upper and lower control arms. Crafted through CAD design, they’re built from durable 1/4″ thick steel plate. Every set comes complete with all essential mounting hardware and comprehensive installation instructions.
Amount of Lift: 3.5”
Track Width: 1.75″ wider per side
Maximum Tire Size: 35”
Maximum Backspacing: 5.25”
Minimum Rim Size: 17”
The Dirt King lift spindles increase the track width 1.75” per side. Due to the increased width wider fiberglass fenders may need to be installed.
If installing 35” tires modifications to the wheel wells and bumper may need to be made for proper tire clearance.
Fabricated lift spindles
Extended DOT approved brake lines
Brake line mounting brackets
Grade 10.9 caliper mounting bolts
Upper control arm washers
Direct bolt on application
Professionally MIG welded
Proudly made in the USA
The installation of this product requires the use of factory hub snouts. They will need to be pressed out of the factory spindles and pressed into the new Dirt King lift spindles.
|24 × 16 × 8 in
2004, 2005, 2006, 2007, 2008
|2004 - 2008